Are you looking for a high performance small block chevy engine to make serious power and still run pump gas?  Our 434 Chevy engine blueprint will make 600+HP and 600+Ft./Lbs. torque on 91 octane!  More depending on camshaft choice.  Be aware that you will be a frequent visitor to your local tire dealer.  Here is the build sheet:

 Parts

• Dart Little "M" Block with Billet Caps 4.155 Bore
• AFR 210cc Heads
• Ross Racing Pistons
• Total Seal Plasma Moly Rings
• Scat 4340 4.000" Stroker Crankshaft
• Scat 4340 6.000" H-Beam Rods with ARP2000 Bolts
• Clevite H-Series Rod and Main Bearings
• Durabond Performance Cam Bearings
• AFR 1.60/2.08 +.100 Valves
• AFR Chromemoly Guide Plates
• AFR Chromemoly 10* Retainors
• AFR 10* Keepers
• AFR Double Springs
• Jesel Belt Drive
• Comp Custom Ground Hydraulic or Mechanical Roller Cam
• Lunati Retro-Fit Hydraulic or Mechanical Roller Lifters
• Melling Performance Oil Pump and Drive
• Manley Chrome Moly Push Rods
• Crower Enduro Full Roller Rocker Arms
• ATI Super Damper
• UCM Adjustable Timing Pointer
• Edelbrock Super Victor CNC Intake
• Holley Dominator Carb
• UCM Tapered Blend Carb Spacer
• Milodon Street/Strip Oil Pan and Pick-Up Screen
• Fel-Pro Performance MLS Head Gaskets
• Fel-Pro Performance One Piece Pan Gasket
• Fel-Pro Performance Steel Core Valve Cover Gaskets
• Fel-Pro Performance Timing Cover, Intake, Rear Seal, and Carb Gaskets
• Pioneer Brass Freeze Plugs
• Polished Aluminum EER Valve Covers
• MSD Pro-Billet Distributor
• MSD 6AL-2 Ignition Box
• MSD Wires
• MSD Blaster 3 High Vibration Coil
• UCM Billet Coil Bracket
• UCM Billet Distributor Clamp
• UCM Billet Ignition Wire Hold Downs
• NGK Plugs
• Fram Performance Filter
• ARP Head, Valve Cover, Oil Pan, Oil Pump, and Carb Studs
• ARP Intake and Balancer Bolts

Machine Work/Labor

• Mill Deck with BHJ Fixture, Torque Plate Hone, Align Hone, Brush Oil Galleys Dart Block
• Pressure Test, Hone Bronze Valve Guides, Equalized Radius Valve Job, Set Spring Pressure, Assemble with Viton Metal Body Seals (2) AFR Heads
• Brush Oil Galleys and Micro Polish Scat Crankshaft
• Size Big End and Pin-Fit Bushings (8) Scat Rods
• Blueprint and Pressure Test Melling Oil Pump
• Pin-Fit (8) Ross Pistons
• Hone ATI Balancer
• Cam Doctor Camshaft
• Custom Engine Assembly*

*Includes Dial Check Piston to Wall Clearence, Dial Check Bearing Clearence, Set Crankshaft End Play, File Fit Rings Gaps, Hang Pistons on Rods, Install Rods and Pistons, Check Rod Side Clearence, Degree-in Camshaft, Install Belt Drive and Set Tension, Install Pan, Pump, and Pick-Up Screen, Set Pick Up Screen Height, Install Damper and Check TDC, Check Valve to Piston Clearence, Double Check Compression Ratio, Install Heads, Measure Push Rod Length, Install and Adjust Rockers, Install Intake, Valve Covers, Spacer, and Carb.

• Dyno Engine*

*Includes Gap Spark Plugs, Make MSD Wires, Check Compresion and Oil Pressure, Break-In Cam, Check for Leaks, Set Timing, Curve Distributor, Jet and Adjust Carb, Adjust Jesel Belt Drive Cam Timing, Tune Engine for Max HP and Torque.  Detailed results and graphs of each dyno pull will be provided as well as a live run DVD.

Engine Build Cost = $14999.00